<Press Release>
New Product : Altera Cyclone III USB-FPGA board

Jun. 18, 2012 Release

HuMANDATA LTD., a manufacturer of various FPGA/CPLD boards in Japan, today released EDA-004Z of USB-FPGA board powered by Altera Corp.'s Cyclone III FPGA (EP3C55F780C8N).

HuMANDATA's EDA-004Z is equipped with Altera high-spec Cyclone IV E FPGA on credit-card size (54 x 86mm) PCB. A configuration device, on-board oscillators, a user switche and LEDs are mounted as minimum components of FPGA design and development.
The EDA-004Z provides 100 user I/Os, which are divided into two I/O banks. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool " BBC [EDA-004]".

HuMANDATA’s ACM/XCM series boards are designed on same PCB size and connector layout. So it is easy to swap the board to another one, and you can quickly try a new FPGA/CPLD.

EDA-004Z is compliant with the RoHS Directive, and is designed for lead-free soldering.
 

Altera USB-FPGA board Cyclone III EDA-004Z
Click to Zoom
: https://www.hdl.co.jp/EDA-301/top.600.jpg

High resolution image for press (0.60 MBytes) :https://www.hdl.co.jp/press/2012/12E0074.jpg


Specifications:

  • Altera Cyclone III (EP3C55F780C8N)
  • Power : 5.0 V single supply
    - 1.2 V/2.5 V/3.3 V on-board regulators
    - USB Bus-power is not available
  • Configuration Device (Altera, 16 Mbit)
  • Resister-protected 100 I/O, PAD 100 mil (2.54 mm) grid
  • FPGA configuration through JTAG
  • FPGA configuration through USB
  • User communication through USB
    (FT2232H Sync-FIFO mode is available)
  • 50MHz Oscillator (50 ppm) or External inputs
  • User Switch (Push x1)
  • User LED x3
  • Status LED (Power, Done)
  • Power-on Reset signal for FPGA configuration
  • JTAG port(10 pin socket) for ByteBlaster[MV/II] or USB Blaster
  • High quality six layers PCB (Immersion gold)
  • Credit-Card-Size 3.386" x 2.126" (86 x 54 mm)
  • ESD and Surge protection component for USB I/F
  • Tested all I/O
  • Non-use of 6 Restricted substances of RoHS directive
  • MADE IN JAPAN

 

Go to product page

About HuMANDATA:

HuMANDATA is a manufacturer of high quality FPGA/CPLD board in Japan.

- Basic and simple features
- Single power supply operation
- Same size/connector layout –ACM/XCM -AP/XP series
- Free download technical documents before purchasing
- High quality and highly reliable board from Japan
- Stocked items are ready to ship immediately

 


Contacts:

1-2-10-2F Nakahozumi, Ibaraki, Osaka, 5670034, Japan
TEL +81-72-620-2002(Japanese)
FAX +81-72-620-2003(Japanese / English )
URL


[]

© HuMANDATA LTD. - Intel (Altera) & Xilinx FPGA Boards manufacturer in Japan - 2017 Sitemap